Microsoft Lumia 435 Logic board Replacement

Written By: ZFix
  • Comments: 2
Microsoft Lumia 435 Logic board Replacement

Difficulty

Moderate

Steps

4

Time Required

10 minutes

Introduction

How to disassemble Microsoft Lumia 435 and remove / replace the logic board.

  1. LhwSogdmc4XpQhSa
    LhwSogdmc4XpQhSa
    fpHu2rZrbxXpY2sO
    4EFexmjTHX2NeYRP

    • Switch off the phone.

    • Remove the battery and any inserted SIM and memory cards.

    • Use a screwdriver Torx T6 and remove the 4x black screws.

  2. ZfuPyd3vkDfLcwuY
    ZfuPyd3vkDfLcwuY
    BZNNyYcyyTTB4s1t
    v3bNFYXXdYe5jmt6

    • There are several plastic locking clips hold the back cover to the frame.

    • Use a tool with a sharp edge to unlock them and a plastic tool to separate the back cover.

  3. 4IcGKtWhvMvaSYlE
    4IcGKtWhvMvaSYlE
    yN53gWGW4giIWKrC
    uPtTlIOnLLiBNyxr

    • Unhook:

    • the touch screen flex cable

    • the LCD Display flex cable

    • Use a plastic tool lift up and remove the Logic board.

  4. yAcw51e33EFWGypC
    yAcw51e33EFWGypC
    SdIVIt3lmBv44acT

    • This is the logic board / main board - a front and rear view.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

ZFix

Member since: 09/12/13

193490 Reputation

2 comments

كيف اقوم بفك الهاتف وفحص الخلل الذي يوجد فيه .اعني ان هاتفي لا يقبل العمل اظن انه محروق كيف افحصه ؟

How do I remove the phone and to inspect the defect in which the .ani there is a telephone that does not accept the work I think it's seared how it checked ?

mohammad7salaheddin -

I need dead boatd off lumia 435

Azhar from lahore chung

Muhammad Azhar -