Motorola Moto 360 Wrist Strap Replacement

Written By: Steven Tan
  • Comments: 0
Motorola Moto 360 Wrist Strap Replacement

Difficulty

Moderate

Steps

3

Time Required

5 - 10 minutes

Introduction

Changing the wrist strap may be easier if the rear cover is taken off first, but removing the rear cover is not required and risks damage to the rear of your device.

  1. 3Cb6Io2IkkLLiiTi

    • Locate the spring-loaded pin that attaches the wrist strap to the watch.

    • There is a tiny groove on the end of the pin. This is where you will place the tweezers.

  2. CiCUQQB1bqIT4kTv

    • Take care not to lose the spring-loaded pin when removing the strap.

    • Use the tweezers to compress the spring-loaded pin so the strap can be removed.

  3. BhZlJlxZOvqZVQpj
    BhZlJlxZOvqZVQpj
    EO1XhwFOR1ungL5S

    • Pull the wristband away from the watch face.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Steven Tan

Member since: 31/01/15

311 Reputation

0 comments