Introduction
Once the back cover, battery, and motherboard have been removed, the keypad can accessed.
- 
                  
                  - 
            Slide the cover release button towards the bottom of the phone 
- 
            Once the battery cover pops up, slide the cover towards the top of the phone and lift up. 
 
- 
            
- 
                  
                  - 
            Lift the motherboard away from the case of the phone, being careful not to break the wire that goes up into the hinge. 
- 
            Peel the motherboard off of the keypad. The two pieces are glued together and separate without much effort. 
- 
            The motherboard should now be completely disconnected from the phone. 
 
- 
            
- 
                  
                  - 
            Once the motherboard has been removed from the keypad, the keypad sensor can be detached from the phone at the hinge. 
- 
            Gently pry off the cable connecting the keypad sensor. The keypad sensor should now be completely separated from the phone. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.