Ninja Professional Blender 1100 watt Blade Replacement

Written By: Elizabeth Hernandez
  • Comments: 0
Ninja Professional Blender 1100 watt Blade Replacement

Difficulty

Easy

Steps

4

Time Required

3 minutes

Introduction

The Ninja Professional Blender 1100 watt blade housing is simple to replace and can be accomplished by any Ninja user.

  1. LKgIasEeSEZS5SUC

    • Unplug blender.

    • Remove the pitcher from the base by turning it counter clockwise so the pitcher is not aligned with the arrows on the base.

  2. BeTGRTSoV1bI5vbr
    BeTGRTSoV1bI5vbr
    gpAHSaO2DXeNvwMx

    • Press the release button on top of the lid.

    • Pull the lid off.

    • Use both hands when taking off the lid. You may need to pull hard if there is water between the lid and the pitcher, which will create a tight suction.

  3. aEMeNf5PoYhHoOTR

    • Blades are very sharp.

    • Use one hand to pull the blade housing out of the pitcher while using the other hand to hold onto the pitcher handle.

  4. lBA4ZJLuQFoYMnpe
    lBA4ZJLuQFoYMnpe
    1DYSw6yEciZvmB4L

    • Insert the new blade house into the pitcher and align it so it fits onto the mounting gear.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Elizabeth Hernandez

Member since: 14/09/15

318 Reputation

0 comments