OnLogic CL100 mSATA SSD Replacement

Written By: scx32
  • Comments: 0
OnLogic CL100 mSATA SSD Replacement

Difficulty

Easy

Steps

3

Time Required

2 minutes

Introduction

    • If there are rubber feet on the bottom of the device, remove the feet.

    • Remove the 4 screws on the bottom of the device.

    • After removing the orange pad, remove the screw holding the SSD in place and slide it right, then up.

    • While reassembling, align the SSD and slide it left.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

scx32

Member since: 26/02/23

159 Reputation

0 comments