Introduction
Use this guide to replace your old or damaged Drinking Lid Seal.
Tools
- 
                  
                  - 
            Grip the blender base with one hand and blender bottle with the other hand. 
- 
            Rotate the blender bottle a quarter turn counterclockwise . 
- 
            Lift the blender bottle out of the blender base. The blade assembly should still be attached to the blender bottle. 
 
- 
            
- 
                  
                  - 
            Grip the blade assembly with one hand and blender bottle with the other hand. 
- 
            Rotate the blade assembly counterclockwise until it is completely unscrewed from the blender bottle. 
- 
            Lift the blender bottle to separate it from the blade assembly. 
 
- 
            
- 
                  
                  - 
            After removing the blade assembly from the blender bottle, ensure that your drinking lid assembly has its seal placed in the seal bed. 
 
- 
            
- 
                  
                  - 
            Grab the blender bottle with one hand and the drinking lid assembly with the other. 
- 
            Place the drinking lid assembly onto the blender bottle and twist it clockwise until it is tight around the blender bottle. 
 
- 
            
- 
                  
                  - 
            After separating the drinking lid assembly from the blender bottle, position the plastic opening tool on either side of the seal in the drinking lid assembly. 
- 
            Wedge the tool between seal and seal seat wall. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.