Introduction
This guide will show you how to remove the top cover of your camera so you can replace it.
Tools
- 
                  
                  - 
            Push the small gray tab on the top right corner to the left. The battery will pop out slightly. 
- 
            Keep your finger clear of the battery when it pops out. 
 
- 
            
- 
                  
                  - 
            Lift up the bottom back cover by prying the bottom edge with the spudger. 
- 
            Gently lift up the back cover with your hand from the bottom to the top. 
 
- 
            
- 
                  
                  - 
            Lift the tabs on the ZIF connectors. 
- 
            The ribbon cables should easily come out of the ZIF connectors. 
 
- 
            
- 
                  
                  - 
            Using the spudger, pry off the top cover by gliding the spudger along the entire edge between the top cover and the front cover. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.