Pioneer A1 XW-SMA1-K Motherboard Replacement

Written By: john adewoye
  • Comments: 1
Pioneer A1 XW-SMA1-K Motherboard Replacement

Difficulty

Moderate

Steps

5

Time Required

7 minutes

Introduction

If you are encountering the motherboard of this speaker, these will be the steps of taking it apart.

  1. GhCrTeoXkwXTAOr1

    • Use the spudger to remove the mesh front panel.

  2. MF6oNoKUXkANPjk6
    MF6oNoKUXkANPjk6
    pG2LmQLhjWBpAn5l

    • Use a Phillips #1 screwdriver to remove the thirteen 12 mm screws in the speaker frame.

    • Remove the four screws at the bottom of the device

    • Remove the speaker frame by pulling vertically upwards revealing the motherboard.

  3. RJYpeZHZR36y3WU2
    RJYpeZHZR36y3WU2
    VuVFQMvAHHwhKQki
    hvfAraKRSLLD3Aur

    • Use a Phillips #1 screwdriver to remove the twelve 12 mm screws from the middle frame.

    • Remove the middle frame by pulling upward and vertically.

  4. BnTImMqPitbmAKKE
    BnTImMqPitbmAKKE
    SnC6xwmF2diRn41C

    • Use the Phillips #1 screwdriver to remove the nine 12 mm screws from the motherboard.

    • Flip the motherboard over.

    • Remove the motherboard by detaching the antenna.

  5. 2FgNsCZGsqBRjPCB

    • Remove the motherboard from the speaker.

    Saya punya unit Pioneer wx-sma1 tidak mau on cuma LED biru berkedip terus menerus tidak mau on LED merah tidak mau on mohon bantuannya terima kasih

    Borris Suryana -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

john adewoye

Member since: 14/02/19

109 Reputation

0 comments