Introduction
Follow this guide to replace the power supply on your PlayStation 2 Slimline.
Tools
- 
                  
                  - 
            Turn off your PlayStation 2 and remove the disc and Memory Card. 
- 
            Turn over the PlayStation 2 and put it on a soft surface (e.g. a towel). 
 
- 
            
- 
                  
                  - 
            Locate the six covers. 
- 
            Two are located underneath the feet. 
- 
            One cover is located underneath the Void sticker. 
 
- 
            
- 
                  
                  - 
            Remove the six Phillips #1 screws with a screwdriver. 
- 
            The screws on the right are a bit deeper inside the shell as like the rest but are the same size. 
 
- 
            
- 
                  
                  - 
            Separate the clips at the front and the overhanging side from their mounting using a Prying Tool. 
- 
            Separate the two halves. 
 
- 
            
- 
                  
                  - 
            Remove the power supply connector from the motherboard. 
- 
            To separate the connector from its socket, squeeze the tab against the connector, and pull the connector straight up from the socket. 
 
- 
            
To reassemble your device, follow the above steps in reverse order.
One comment
I remember i was open the PS2 for cleaning but when i cleaning the power supply, my sister plugged it than I got an electric shock. 🤣🤣🤣
Memozit -