PlayStation 2 Top Cover Replacement

Written By: jwyoung

Comments: 3

Difficulty

Easy

Steps

Time Required

5 minutes

Introduction

Replace your PlayStation 2's scratched-up or worn out top cover.

Tools

Step 1

Flip the PlayStation 2 over so it lays with the bottom of the device facing upwards.
Use the flat edge of a metal spudger to pry the eight flat screw covers out.
Remove the following eight screws securing the top cover to the bottom case:
Four 55.4 mm Philips screws
Four 18.0 mm Phillips screws

Before proceeding to step 2, Take a look at your PS2, some PS2's have 10 screws (and screw covers) instead of 8 (i found them underneath the optical drive), these instructions have mislead me and i ended up breaking my top cover for my PS2.

Tristan -

Ich möchte daraufhin weisen, daß es bei der SCPH-50004 zwei verschiedene Schraubabdeckungen gibt.

4x Kreuzförmig 4x rechteckig

Sowie eine silberne schraube die sich an der unterseite aufhöhe des Reset-Knopfes befindet.

Christian Lehnhardt - 28/08/23

Step 2

Some models have a different number of screws and feet. Remove all the feet and screws in the bottom of the case.
The 10 screw model has 6 screws in the bottom-most portion and 4 in the upper tray.

Step 3

Peel the warranty sticker (located next to the main power switch) straight away from the case.
To avoid activating the VOID that may come up, heat it carefully to remove and replace it clean

Step 4

Flip the PlayStation 2 back to its original upside position.
Lift the top cover off the bottom case.
To facilitate the removal, it is recommended to pry open the half closer to the power switch first while rocking the top cover towards the front of the bottom case.
Carefully remove the power cord that attaches the top and bottom halves by disconnecting the power cord assembly from the top case.