Portable Power Station Charge and Power On

Written By: Nick Schultz
  • Comments: 0
Portable Power Station Charge and Power On

Difficulty

Moderate

Steps

3

Time Required

No estimate

Introduction

Prerequisite-only guide for plugging in and powering on a Portable Power Station.

  1. D4ZRARJcvtrM3DL1
    D4ZRARJcvtrM3DL1
    bbdODYGsXTWoQG2s

    • Connect a USB-C power cable to a USB-C charger. We recommend at least 45W for optimal performance.

    • iFixit's 65W GaN Fast Charger recharges a fully depleted power station in about two hours.

  2. IiVlVEgXmwToB1CO
    IiVlVEgXmwToB1CO
    Owm4n5g4EeteTgLi
    f2pStDQIKCVoUodk

    • Connect the other end of your cable to the rear USB-C port on the power station (the side without the screen).

    • A charging indicator animation will appear on the display.

    • Keep the USB-C charger plugged in until the battery indicator shows full.

    • It's safe to leave it connected continually to keep the power station batteries topped up.

  3. nOxCcfCX2XqYxPNk
    nOxCcfCX2XqYxPNk
    No5FlIs1mccUXEbx

    • Press and hold the blue action button for three seconds to turn on the power station.

    • The iFixit logo will appear while the power station is turning on.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Nick Schultz

Member since: 24/03/24

13497 Reputation

0 comments