Introduction
This guide shows how to properly remove and replace the handle on your Ridgid Brushless R86040. This may be necessary if it has become damaged and it becomes a safety hazard to use while operating the device, or if you feel like upgrading to a better handle. Before attempting any of the following steps, make sure you turn off your device and remove the battery.
- 
                  
                  - 
            To remove the handle, firmly turn it counterclockwise while pulling it away from the device until it comes out. 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.