Samsung 27E510C Back Panel Replacement

Written By: giggythore

Comments: 1

Difficulty

Very easy

Steps

Time Required

1 - 2 minutes

Introduction

The back panel is the "lid" that covers many of the monitors electrical components. Therefore this is a prerequisite for most of the other repair guides on this device.

Tools

Step 1

Use the #1 Phillips head screw driver to remove each 13.75mm length screw from the rear panel.
The screw alone with the ports is a different size than the rest, its length is 12mm.

Step 2

Insert the heavy duty spudger in between the monitors back panel and its frame.
Use the heavy duty spudger to pry open the back panel.
Over aggressive prying could break the tabs holding the back panel in place.

Broken some of the tabs case was not exclusive force but the method of force the bottom panel should NOT be pushed towards you. Create seperation all over the bottom side and slowly pull the cover off.

Texas2 -