Introduction
This guide will enable you to replace the screen in case of broken glass, failure to respond, etc. You will need a heat gun, Phillips #00 screwdriver, iFixit opening tool, and tweezers. Take care when using dangerous tools.
Tools
- 
                  
                  
- 
            
Locate the battery near the bottom of the phone. The battery is square, flat, and is labeled 'SAMSUNG'.
 
 - 
            
 - 
                  
                  
- 
            
Use a heat gun or hair dryer to loosen the adhesive between the midframe and the rest of the device.
 
 - 
            
 - 
                  
                  
- 
            
Lift the plastic panel that separates the digitizer and the motherboard with an iFixit Opening Tool
 
 - 
            
 
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.
One comment
What if the phone does not come back on after assembly