Samsung Galaxy Gear Display Housing Replacement

Written By: Dalt Lasell

Comments: 1

Samsung Galaxy Gear Display Housing Replacement

Difficulty

Easy

Steps

Time Required

1 minute

Introduction

To access the interior of the device, the housing that contains the display needs to be removed. This guide will act as a prerequisite for all other guides.

Tools

Step 1

Use a T5 Torx screwdriver to remove the four 4.0 mm screws on the back of the device.
Be sure your device is turned off.

Step 2

Use a plastic opening tool to separate the display housing from from the device.
To ensure you don't damage your device, insert the opening tool and slide it the entire length of the gap on both sides of the device.

Step 3

Gently pry back the metal flap on top of the connector.
Locate the two 2.0 mm black screws and unscrew using a Phillips PH00 bit. The connector will detach from the device.