Samsung Refrigerator Freezer Drawer Replacement

Written By: Arthur Shi
  • Comments: 0
Samsung Refrigerator Freezer Drawer Replacement

Difficulty

Moderate

Steps

4

Time Required

No estimate

Introduction

Prereq guide to remove the freezer drawer for the Samsung RF28R7201SG refrigerator.

  1. nIwoFtnVLZV1la1N

    • Slide the freezer drawer fully open.

  2. cGefYjNnkD4MPkPx

    • Lift and remove all the freezer bins from the drawer.

    • You should be left with a freezer door attached by two rails.

  3. wJ1vZKlDMBKUqSnu
    wJ1vZKlDMBKUqSnu
    3rGgEBVHpDaldqBY
    5SBruEfh6st4LewQ

    • A plastic tab locks each drawer rail in place.

    • Use a flathead screwdriver to press in the plastic tab near the inner end of the drawer rail.

    • As you press the plastic tab, grasp the rail with your free hand and slide it towards you slightly to unlock the rail.

  4. Ajx4BYwKIdxgBsGG
    Ajx4BYwKIdxgBsGG
    5yq3gKRBZGK1cI3J

    • Repeat the rail unlock procedure on the other drawer rail.

    • Once both rails are unlocked, firmly pull both rails to slide them out of the refrigerator wall guides.

    • Remove the freezer drawer.

    • To install the freezer drawer:

    • Push the geared torsion bar until it rests at the very end of the rails.

    • Align the drawer rails to the refrigerator wall guides.

    • Close the freezer drawer until the rails lock back in place.

    • If you don't hear a click, visually check if the plastic tabs have locked in place. You may need to push the rails in a little further with your fingers to set the tabs.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Arthur Shi

Member since: 03/01/18

272294 Reputation

0 comments