Samsung WB350F Rear Case Replacement

Written By: Zachary Bourgault
  • Comments: 0
Samsung WB350F Rear Case Replacement

Difficulty

Easy

Steps

4

Time Required

No estimate

Introduction

This guide will show you how to remove and replace the rear case of your Samsung WB350F.

  1. ltEJ6Kgq6HktjXp3
    ltEJ6Kgq6HktjXp3
    oKEK4yyCX4CACMdu
    XEqdAFGROu1RwnKU

    • Remove the wristlet strap.

    • If you have difficulties use your plastic spudger. If you don't have a plastic spudger, you can also use a pen/pencil.

  2. tSJ5itNLyrUQ3Gyf
    tSJ5itNLyrUQ3Gyf
    RrJrsIqtZY4gVi4W
    UtxiIIkf5VD2JIhK

    • Remove five 3.2 mm screws with a Phillips #000 Screwdriver.

    • There is one silver screw on the bottom and two black screws on each side.

    • Keep the screws together for an easier re-assembly later.

  3. 6ObcFJgUoMfmwRWI
    6ObcFJgUoMfmwRWI
    GMWMxkLUbCdGeAAb
    pmjtTN12BVdwgFXS

    • Open the case of the camera using your plastic opening tool.

    • Start on each end, working the tool into the opening and popping the casing up. Then work your way down the longer sides (top and bottom).

    • If you don’t have plastic opening tools, any flat plastic object, like a used gift card, can be used as an improvised alternative.

  4. PersCTuUvDLmjgwK

    • Remove the plastic casing, exposing the inner workings of the camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Zachary Bourgault

Member since: 04/03/16

101 Reputation

0 comments