Sansa e260R Front Panel Replacement

Written By: Casey Smith
  • Comments: 0
Sansa e260R Front Panel Replacement

Difficulty

Moderate

Steps

7

Time Required

No estimate

Introduction

  1. jQTrRMSEiGTyuUQI

    • Before disassembling the device, make sure it is powered off.

    • Remove the four 1.5mm screws on the back of the device.

  2. UekhGwVfJJyCN3n6

    • Using a plastic opening tool, lift the metal backing from the front of the device.

  3. sFraBpfZdN6WtrYu

    • Pull the rear panel off of the Sansa e260R.

  4. y5DH5wMWrqM5PAvw

    • Grip the bottom of the battery with your thumb and forefinger and pull it away from the device.

  5. oxeKUWOWSIOJK4PA

    • Remove the four 1.5mm screws on the inner casing of the device.

    • These screws are very small and hard to extract from the casing. It may be helpful to use a magnetic screwdriver.

  6. lAiAAmD2DVyIcoht

    • Flip the device so that the front is facing you.

    • Slide a plastic opening tool between the plastic front cover and the metal back cover of the device.

  7. UsdIebWtLaKLXNuF
    UsdIebWtLaKLXNuF
    Yp6kA2FCF3c3PUZc

    • Pull the front cover away from the rest of the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Casey Smith

Member since: 21/01/12

111 Reputation

0 comments