Siemens Surpresso - Bosch Benvenuto top cover removal

Written By: VauWeh
  • Comments: 0
Siemens Surpresso - Bosch Benvenuto top cover removal

Difficulty

Moderate

Steps

1

Time Required

No estimate

Introduction

Basic instructions: how to remove the top cover of the Siemens Surpresso - Bosch Benvenuto

These instructions may also help with other Siemens/Bosch models and with coffee makers from Nivona, Melitta, and Miele—they have a very similar design.

  1. rxLKLIpSnwtpLBNX
    rxLKLIpSnwtpLBNX
    PaomBApodaRoNR1D
    Z2OqwvxXeXENDNTF

    • The top cover is engaged with bayonets in several places. It must first be pushed back about 1 cm and then lifted away upwards.

    • Grasp the powder compartment cover firmly and pull it upwards out of its hinges. Otherwise it will be in the way of the top cover.

    • Pull the top cover back about 1 cm. If it sticks in front, you can help a little with plastic levers.

    • Lift the top cover away from the top.

Conclusion

Follow the steps in reverse order to reassemble your device

Author

VauWeh

Member since: 19/10/15

234462 Reputation

0 comments