Sonos Roam Speaker Grille Replacement

Written By: Kristen Gismondi

Comments: 2

Difficulty

Moderate

Steps

Time Required

No estimate

Introduction

Tools

Step 1

Power off your Sonos Roam before beginning disassembly.
Use the metal spudger to pry the end cap with the buttons.
Pry from all sides to loosen the adhesive.
Use the iOpener, a blowdryer, or a similar heating device to loosen the adhesive if having difficulty.

What about IP67 rating? Am I going to lose the water resistance rating if I do not reapply some glue or additional adhesive when reassembling things back?

Askar -

Step 2

Flip the device to the other end cap.
Use the metal spudger to loosen the adhesive.
Use the iOpener, a blowdryer, or a similar heating device to loosen the adhesive if having difficulty.

Step 3

Flip the device so that the Sonos logo is on the top.
Use the Torx T6 screwdriver to remove the two 6 mm screws.

my sonos roam sl used t7 screws here

Arndt Kurek -

Step 4

Flip the device.
Use the Torx T6 screwdriver to remove the two 6 mm screws.

Step 5

Flip the device so the Sonos logo is on the top.
Use the iFixit opening picks to wedge between the split of the grille and the back of the speaker to pry the grille apart.
Use the iOpener, a blowdryer, or a similar heating device to loosen the adhesive if having difficulty.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Kristen Gismondi

Member since: 12/11/14

88929 Reputation