Introduction

This is a how-to guide on replacing the front and back case of a Sony Cyber-Shot DSC W690. This case may need to changed or replaced if damage has occurred to the outside of the camera, to access internal units, or to upgrade the external cosmetics. This is a simple procedure.

  1. RKPAxLAWPGZh12Lm
    • Locate the battery door

  2. V1DaKtF4HjHTxHNE
    • Locate and open battery lock by pushing the lid towards the inside and lifting

  3. mmjFxKMYp2Y64xnM
    mmjFxKMYp2Y64xnM
    3wSgasmyFjyX6rkO
    • Remove the battery

  4. eTHZMXO3qMFDHBjR
    • Remove the wrist strap off of the camera

  5. cO4JspnwOIQuefXx
    cO4JspnwOIQuefXx
    sLKHIgh3VVICH5La
    • With the screwdriver, remove all six 3mm screws on the outside of the camera. To unscrew, insert screw driver into indentation of screw and twist in counterclockwise

    • Keep screws in a safe place

  6. pjOhHNrbkQTMmtfF
    pjOhHNrbkQTMmtfF
    PNOMapTDhnFURavb
    • Carefully pry the case apart by pulling the front and back sides in opposite directions

Conclusion

To reassemble your device, follow these instructions in reverse order; screwing the small screws in a clockwise manner.

Will Norris

Member since: 29/01/15

605 Reputation

One comment

Ola tenho uma maquininha dessas , só precisa trocar uma peça a tampinha que segura a bateria, alguém poderia me indicar onde compro .

Paulo Ribeiro -