Sony Ericsson Xperia Pro MK16A Logic Board Replacement

Written By: Craig
  • Comments: 0
Sony Ericsson Xperia Pro MK16A Logic Board Replacement

Difficulty

Moderate

Steps

6

Time Required

15 - 30 minutes

Introduction

This guide will help you replace the logic board on your Sony Ericsson Xperia Pro MK16A phone. Follow along and you will have a new logic board installed in about half an hour.

  1. UOapxaQJDXJPUWds
    UOapxaQJDXJPUWds
    WyoAjPtqMIVN1irW
    JAnIu3ashcCOq2JF

    • Use a plastic opening tool to get the back cover off your phone.

    • The plastic opener will work on any side, but be careful and pry gently.

  2. tXDJE5eIJurEyQmY

    • Locate the battery in your phone.

    • Find the divot below the battery.

    • Use your thumb to lift the battery out of the phone.

  3. AJ2gOIIO4QIC4GuH
    AJ2gOIIO4QIC4GuH
    ul5WClMTP1AjJViI
    6gdWhs32TMQwdoev

    • Remove the 4 black screws with the Phillips screwdriver.

    • Remove the 4 silver screws with the Torx screwdriver.

  4. cjrVkSJUfPxmgCZs

    • Insert the plastic opening tool in between the two halves of the case. Pry around the phone to detach the back case.

  5. DbQOhpmNrcw6c625
    DbQOhpmNrcw6c625
    Rb4xvTrmHqNqxHYL
    6an1nPf2TIZN1FRY

    • Remove the last screw that is connecting the logic board using the Phillips screwdriver.

    • Undo the two ribbons.

  6. 2nl5BXHX2EwX63ID
    2nl5BXHX2EwX63ID
    fXGBcRtUDclkGcA4
    cTRvWTORyOfBPAZY

    • Undo that last connector.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Craig

Member since: 21/10/14

55 Reputation

0 comments