Introduction
Tools
Parts
- 
                  
                  - 
            Heat the back cover to soften the adhesive sticker. 
- 
            Place the suction cup and inert metal opening tool to open a gap from top side. 
 
- 
            
- 
                  
                  - 
            Insert the guitar pick and slide it to cut the adhesive sticker underneath. 
- 
            Remove back cover. 
 
- 
            
- 
                  
                  - 
            Release rear camera connector, front camera connector, audio jack flex connector and main flex connector on the motherboard and remove the screws there. 
- 
            Take away the plastic bracket. 
 
- 
            
- 
                  
                  - 
            Remove metal cover securing loudspeaker and twist off screws. 
- 
            Pry up and loosen the bottom side of main flex assembly. 
 
- 
            
- 
                  
                  - 
            Remove main flex. ( Attention: the fingerprint sensor connector is here, be careful to loosen it) 
 
- 
            
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.