Toro Cement Mixer 68009HD 2018 Tub Replacement

Written By: Arthur Shi
  • Comments: 0
Toro Cement Mixer 68009HD 2018 Tub Replacement

Difficulty

Moderate

Steps

12

Time Required

10 - 20 minutes

Introduction

This guide shows how to remove and replace the tub for the Toro Cement Mixer 68009HD.

Warning: The tub is extremely heavy and requires at least two people to lift it. Be sure to practice safe lifting techniques.

  1. QRu5sAKCYl3BAajS
    QRu5sAKCYl3BAajS
    6XDIahrXsDsc5ttc

    • Before you begin, press the engine-stop switch to turn off the engine.

  2. ihA3blWOJh16NfLY
    ihA3blWOJh16NfLY
    qDBNEGO2EqsrJZny
    a1mXqaERn5EPNKfq

    • Unlatch the three rubber straps securing the cowl.

  3. t6EPSOKP5cZQ4j5c
    t6EPSOKP5cZQ4j5c
    BBmw2qjdHb4le5nr
    LOKUGjo5BlbTqqgL

    • Swing the cowl up until it rests securely on the frame.

  4. urjQolHXf1Ut5agC
    urjQolHXf1Ut5agC
    6rJqTtNYfyDNIAGi

    • Slide the fuel cutoff lever to the left to cut the fuel supply to the engine.

  5. fX2CwCabESHiPPWY
    fX2CwCabESHiPPWY
    gBiPkBWFfRE5X5Bf

    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

  6. hUjssd2Iksy4UImC
    hUjssd2Iksy4UImC
    6A1sTjQGW5Hsd2ZD

    • Pull up on the brake lever to disengage the brake.

  7. ZUnB2RkieNYoZTCP
    ZUnB2RkieNYoZTCP
    BUN5nnwkX6ZHh1Ur
    cwVM2yhdJJSlrSUS

    • Rotate the tub until the yoke and dish assembly sit directly below the tub.

  8. qbUYQa1Z2GWodDtq
    qbUYQa1Z2GWodDtq
    sbwQ66ITadj1hHMg

    • Push down on the brake lever to re-engage the brake.

    • Make sure that the brake is fully engaged.

  9. 5xFY1WyCON1VF2pW
    5xFY1WyCON1VF2pW
    q2hkVXhAKx4Ac2CO
    2MydtXZ2LEnjX6c3

    • Use a 3/4 inch socket to remove the six nuts securing the tub to the dish.

  10. YUNPB1b23QJUOsrS

    • Remove the six drum clamp plates from the tub mounting points.

  11. HLIsAfG5tGPemJi2

    • Lift the tub up slightly by the gear ring to loosen the tub from the dish.

  12. dsxyV4jIcHnWpcvJ
    dsxyV4jIcHnWpcvJ
    2UgkveovOFFvKaQF
    dAqoAKQWIuRnOTbb

    • The tub is extremely heavy and requires at least two people to lift it. Be sure to practice safe lifting techniques.

    • Lift the tub straight up from the dish and remove it from the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Arthur Shi

Member since: 03/01/18

272267 Reputation

0 comments