Toro Log Splitters 22618HD 2019 Control Valve Bracket Replacement

Written By: Carsten Frauenheim
  • Comments: 0
Toro Log Splitters 22618HD 2019 Control Valve Bracket Replacement

Difficulty

Moderate

Steps

6

Time Required

No estimate

Introduction

Prerequisite only! This guide shows how to remove and replace the control valve bracket on the Toro Log Splitter 22618HD 2019 / LS-922.

  1. Oayc2Rs5nayc1XDV
    Oayc2Rs5nayc1XDV
    g4nXlg5vKANWyicy

    • Before you begin, ensure that the engine is powered down and cool to the touch.

    • Grab the plastic housing at the end of the spark plug wire and pull firmly to disconnect it.

  2. vDPEfXkdhOkpgmJO
    vDPEfXkdhOkpgmJO
    RhSoM6jUyXRv2LPE

    • Flip the red engine ON/OFF switch to the OFF position.

  3. ZUbbVJ15Sl4HybJp
    ZUbbVJ15Sl4HybJp
    wMEtAY1n2cQoqf5Y

    • Flip the fuel valve lever to the OFF position.

  4. rVs5bIgDQNulO3Z2

    • Use a 3/8 inch socket to remove the three bolts securing the control valve to the control valve bracket.

  5. tiuXEgvKwZUuijfs

    • Use a 9/16 inch socket to remove the two bolts securing the control valve bracket to the frame.

  6. nnLTo32bqhdLmENM
    nnLTo32bqhdLmENM
    evFGBWAnfJMGd362

    • Remove the control valve bracket.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Carsten Frauenheim

Member since: 10/03/20

130781 Reputation

0 comments