Introduction
This guide will show you how to replace your disc drive. This repair requires only a small Phillips Head Screwdriver and your hands.
Tools
- 
                  
                  - 
            To begin, locate the middle L-shaped panel on the back of the device. Remove the one 7mm long screw (5mm head) located on that panel. 
- 
            Once the screw is removed, lift the panel by grabbing the indentation by the screw and pulling upwards. 
 
- 
            
- 
                  
                  - 
            Locate the screw to the right of the RAM inside the panel. This screw is 6mm long (5mm head); remove it with a small Phillips head screwdriver. 
 
- 
            
- 
                  
                  - 
            Now that the single screw is removed, you should be able to smoothly slide out the disc drive. 
- 
            Do this by grabbing the tray located on the right edge of your device and pulling out. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.