Toshiba Satellite L55t-B5271 Back Panel Replacement

Written By: Garrett Garofalo
  • Comments: 0
Toshiba Satellite L55t-B5271 Back Panel Replacement

Difficulty

Easy

Steps

4

Time Required

2 minutes

Introduction

This guide will help you remove the back panel of your device. No special skills are required, but you do need to know how to use a Phillips #00 screwdriver.

  1. 1BFfNXAtPKFBJmqt
    1BFfNXAtPKFBJmqt
    B1PUNPA4McvEHiVy
    hDiN52dVVruo6sZM

    • Make sure you turn the laptop off first.

    • Close the laptop lid and flip it over so that Toshiba logo is facing down.

  2. EiZBkC14YutbeY6k
    EiZBkC14YutbeY6k
    PekJaZAiuDvEvg4M

    • Remove the two 6.5 mm Phillips head screws indicated using a Phillips #00 screw driver.

  3. skdvSognqLBe5eEy
    skdvSognqLBe5eEy
    65xWCmJvsfucGIQU
    JZThWWiEdMZKcWGG

    • Once the screws are removed, slide the battery pack out of the computer.

  4. dt5CRUPBgweFbOPY
    dt5CRUPBgweFbOPY
    1LfJSvja61bJgfNY
    WhDKjcCA1WyYJBjG

    • Remove all 6.5 mm Philips head screws on the back cover of the laptop with a Philips #00 screwdriver.

    • Use the plastic opening tool to remove the back cover from the laptop.

    • Be aware that static discharge can cause damage to sensitive electrical components within the computer. To avoid this you can wear an anti-static wrist strap.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Garrett Garofalo

Member since: 19/03/18

298 Reputation

0 comments