iPad 4 CDMA Front Panel Assembly Replacement

Written By: Walter Galan
  • Comments: 0
iPad 4 CDMA Front Panel Assembly Replacement

Difficulty

Moderate

Steps

2

Time Required

No estimate

Introduction

Preq for removing the front panel. Specific to the iPad 4, also involves moving the LCD over.

  1. U6yGkNjYxagacxNk
    U6yGkNjYxagacxNk
    luYkqxVx1BfK2lib

    • Remove the four 2 mm Phillips #00 screws securing the LCD to the aluminum frame.

    • The bottom left screw is obscured by the home button ribbon cable connector. Carefully move the home button ribbon cable aside to remove the bottom left screw.

  2. RWTTpmB6EB6JvGwn
    RWTTpmB6EB6JvGwn
    PdiaScxZlXqaGOMu
    2k3fFSstFPH64frJ

    • Using a plastic opening tool or a spudger, lift the right edge of the LCD out of the iPad.

    • Rotate the LCD along its left edge and lay it down on top of the front glass panel.

    • Be careful as you move the LCD. The ribbon cable is fragile and may break if it is flexed too much.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Walter Galan

699383 Reputation

0 comments