iPad Mini CDMA Small Metal Bracket Replacement

Written By: Walter Galan
  • Comments: 0
iPad Mini CDMA Small Metal Bracket Replacement

Difficulty

Moderate

Steps

4

Time Required

No estimate

Introduction

Prereq for removing speakers with battery.

  1. SP3PjgnFYuLsKrgh
    SP3PjgnFYuLsKrgh
    CukomNWKvD1ZqCIK
    SEVpt3qXNDytWvRT

    • Use the tip of a spudger to start peeling up the right side of the black tape covering the small metal bracket.

    • Peel the tape up the rest of the way with tweezers, and remove it from the bracket.

  2. A5WELeoUarMPBxXQ
    A5WELeoUarMPBxXQ
    nbXtdAKcqJKy3TtN

    • Use a plastic opening tool to push the metal bracket slightly to the left.

  3. J6dWETtw2agS3nvC
    J6dWETtw2agS3nvC
    gX2jQNSs2kxIxhyf

    • Use the tip of a spudger to lift up the lower side of the metal bracket.

  4. LtDhVUTKC4JfxhTq
    LtDhVUTKC4JfxhTq
    RFTaQAnVCf2sIgPj

    • Grab the bracket with tweezers and lift it up out of the iPad.

    • During reassembly, hook the top edge of the plate in place first, then lower the bottom into its slots.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Walter Galan

699383 Reputation

0 comments