Introduction
This is a simple teardown of the LG G watch R.
Tools
- 
                  
                  - 
            First remove the watch band using a small flat screw driver to compress the spring loaded pin. 
- 
            Remove the four T4 torx screws (Green). 
- 
            Carefully pry the base off using a thin flat screw driver 
 
- 
            
- 
                  
                  - 
            Disconnect the four electrical connectors from the board 
- 
            Orange - Battery connector 
- 
            Blue - button and charging connector 
- 
            Green - Backlight 
- 
            Purple - O-LED Controller + Mic 
- 
            Remove the three phillips screws securing the board down. Then lift the board off the base 
 
- 
            
- 
                  
                  - 
            The battery is below the board. 
- 
            The battery can easily be pried out using a small flat head screwdriver. 
 
- 
            
8 comments
Is there a wifi antenna inside the LG G watch R?
Yes, there is a WiFi antenna inside the LG G Watch R, however WiFi functionality was only recently added to the G Watch R in a more recent update via Android Wear.
Are there differences between the UK as US G Watch R?
Where could I find a battery for replacement?
Thanks in advance.
Fab -