The three radio theremin was originally invented by Tomoya Yamamoto.[1] The theremin is constructed by tuning three separate radios to create a system that acts similar to a stand-alone theremin.[2] The circuitry in each individual radio is used to functionally modulate the sound out of the third, producing similar tonal qualities as a theremin.

The following process can be used to produce the same effect:

  1. Find three sets of amplitude modulated (AM) radios of superheterodyne receiver type
  2. Place set 3 radio between set 1 and set 2
  3. Set 1 and set 2 radios tuned to 1145 kHz and set 3 to 1600 kHz so that local oscillators of set 1 and 2 well received by set 3 radio
  4. Local oscillator of set 1 and 2 may produce beat sound in set 3
  5. Manipulate hand over set 1 antenna to change the frequency of beat sound
  6. Volume of beat sound reduced by covering set 3 radio with hand.

References

  1. ↑ YAMAMOTO, Tomoya. "Super Theremin utilizing three radio sets « TOMOYA YAMAMOTO". www.tomoya.com. Retrieved 17 April 2018.
  2. ↑ SUZUKI, YURI. "Three Radio Theremin « YURI SUZUKI". yurisuzuki.com. Retrieved 22 December 2016.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.